Reset Oil Life Honda Pilot 2008

18 Nov, 2021 Posting Komentar

09 pilot.qxp 4/2/2008 11:20 am page 3 dashboard details. Turn the ignition switch to the on (ii) position.

HappyBirthday to Chase McClelland from Everyone at Fenton

Turn the ignition on (before starting the engine).

Reset oil life honda pilot 2008. Posted on july 9, 2021 by mitch bartlett leave a comment. If you like to reset any maintenance oil light after an oil change. You will see ‘‘oil life 100%’’ on the information display the next time you turn the ignition switch to the on (ii) position.

Press and hold the sel/reset button until the oil life indicator and maintenance code blinks. The video above shows how to locate the on board diagnostics (obd) plug on your 2004 pilot, how to read the trouble codes and how to reset or clear the check engine light using a scanner on your pilot. Continue to press the trip button until the oil life is displayed.

Now this honda has an oil life indicator and it reports the oil still has 60% of it's life left. Your dealer will reset the display after completing the required maintenance service. The oil life indicator % will change to 100%.

Then press the select/reset button to return your oil life to 100%. Honda oil life indicator is easy to use and will keep your car in proper condition. Resetting the engine oil life display.

This tutorial will show you how. The car has a oil pct display to give oil life left 7/16/2011 1/1/0001. Oil was chang 6/11/2011 1/1/0001.

Hit the up arrow button to select reset. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for honda cars. Use for comparison purposes only.

Likewise, hit the reset button to select this option and now the oil life should read 100%. If the engine oil life is not displayed press the sel/reset knob in the instrument panel repeatedly until it is. Gear to the park position.

Low tire pressure indicator (touring): The manual says i should change the oil when there is about 15% life left. Turn the ignition to the run position.press the select/reset knob until the engine life indicator is displayed.press the select/reset knob for more than 10 seconds, the indicator and the maintenance code(s) will blink.press the select/ reset knob for 5 more seconds, the maintenance code(s) will disappear and oil life will be reset to 100.turn the ignition off.

Turn the engine off as soon as safely possible. Set display panel to oil life. When the honda pilot is due for an oil change, the system will display a notification.

Press and hold the sel/reset knob in the instrument panel for about 10 seconds or until the maintenance item code (s) begin. Once the service has been completed, you will need to manually reset the oil life. Hold the reset button located on steering wheel for 5 to 10 seconds.

If the check engine light on your 2004 pilot is intermittent, try to take note of the conditions when this happens. For more information on how to maintain your honda, visit our website. Press and hold the sel/reset button until the oil life indicator resets to 100 and the maintenance item code is no longer displayed.

The honda oil life indicator does will keep your honda running efficiently. Find how do you can reset service light or turn off board light maintenance indicator when errors like, oil change, check engine, change intervol of inspection, airbag light, inspection key, when maint reqd, appear on board computer display. That it is the full procedure how to reset service light indicator honda pilot.

If your display reads “engine oil life”, select the reset mode by pressing the info button on the steering wheel. Do not compare to models before 2008. To reset the oil life in your honda, you should know a few things about the entire system.

Oil life indicator was at 20%. 2016 honda pilot is super easy! Your actual mileage will vary depending on how you drive and maintain your vehicle.

Honda pilot maintenance light reset procedure: It is an excellent idea for you to check with the dipstick and follow the user manual on how to do this. I have a 2014 honda pilot with 3600 miles on it.

The most important thing is that it has a similar operating mechanism to gm’s ols in that it monitors the type of usage the vehicle has gone through and then uses the data to predict the quality of the engine oil. American honda motor co., inc.; If your display reads “engine oil indicator %”, press and hold the select/reset knob for more than 5 seconds.

Press and hold the reset button until the options cancel or reset are displayed on the dash. So today, i want to talk about resetting the oil life or maintenance light on a honda pilot. * based on 2008 epa mileage estimates, reflecting new epa fuel economy methods beginning with 2008 models.

Press the down arrow button until the oil life percentage is displayed on the dash. Oil life after changing oil and it wont reset 8/1/2011 1/1/0001. Display panel will beep and then show ‘cancel’ on top of ‘reset’.

The service was wonderful! Thank you Diana for helping us